ttips

How to Fix Broken Window Glass – How to Repair Windows:

Windows are an essential component of houses that contribute to the comfort, livability, and aesthetics of a home. When broken, they become an eyesore and pose a safety hazard.

Glass accounts for about 0.2% of the world’s total waste stream. This makes broken window glass one of the most common household accidents. It can be caused by a variety of factors, including accidents, vandalism, and natural disasters.

Repairing window glass is more cost-effective than replacing the whole unit. And, Fixing a broken window yourself can save you around $100-$200.This article compiles a step-by-step guide on how to fix broken window glass.

Table of contents

How to Fix Broken Window Glass | Repairing a Window Glass

Broken window glass is a big safety hazard and it can be dangerous because the sharp edges can cut you. Follow the steps below to carefully repair window glass so that you do not get hurt.

First, you need to get the tools and materials needed. And, these materials include:

  • Safety glasses and gloves
  • Putty knife
  • Hammer
  • Glazier points
  • Glazing compound
  • Replacement glass (same size as the broken pane)

Instructions

#1. Safety First

Before you begin, put on safety glasses and gloves to protect yourself from shattered glass fragments.

Move any furniture or objects away from the broken window to create a clear workspace and prevent tripping hazards.

#2. Remove Broken Glass

Carefully remove the broken glass from the frame using a putty knife or hammer. If the glass is stuck, use a heat gun to soften the glazing compound. Use a dustpan and broom to carefully sweep up the large pieces of glass.

For smaller shards, you can use a cardboard box or a piece of thick cardboard to scoop them up. Dispose of the broken glass properly in a designated container.

If you cannot repair the window immediately, you can temporarily secure the opening with a piece of plywood or a heavy-duty tarp.

#3. Clean the Frame

Clean the frame thoroughly using glass cleaner to remove any debris or remaining glass shards. If the window frame has loose paint or debris, use a putty knife to carefully scrape it off. Avoid using excessive force to prevent damaging the frame.

Gently wipe down the window frame with a damp cloth or sponge. Pay attention to the corners, crevices, and edges, where dirt and grime tend to accumulate.

#4. Prepare the Glazing Compound

Roll the glazing compound into thin, even strips. lazing compound can be quite stiff, especially if it’s been stored in a cold place.

To soften it and make it easier to work with, you can knead it by hand or warm it in a microwave for a few seconds.

Once the glazing compound is softened and conditioned, knead it thoroughly with your hands until it is smooth and pliable. This will help to remove any air bubbles and ensure that the compound adheres properly to the window frame and glass.

Read Also: How to Get Rid of Ground Hornets

#5. Apply Glazing Compound

Apply the glazing compound to the frame, creating a bed for the new glass pane. Use a putty knife to apply a bead of glazing compound around the perimeter of the window frame, where the glass will sit.

The bead should be about 1/4 inch thick and should extend slightly beyond the edge of the frame.

#6. Insert the New Glass Pane

Carefully lower the new glass pane into the frame, ensuring it sits flush with the glazing compound. Press it firmly into the bead of the glazing compound. Make sure the glass is level and even.

Use a putty knife to smooth out the glazing compound, creating a neat and even seal around the glass.

#7. Secure the Glazing Points

Use a hammer to gently tap in glazier points around the perimeter of the glass pane to hold it in place.

Afterward, apply a thin layer of glazing compound around the edges of the glass pane, filling any gaps and sealing the window.

Read Also: 10 Best Tools For Cutting Drywall In  | Best Tools

#8. Allow the Glazing Compound to Dry

After, using a putty knife to smooth out the glazing compound, create a clean and professional finish. Let the glazing compound dry completely, which may take up to 24 hours.

Read Also: How Smart Windows Work in Homes

Can cracked window glass be repaired?

The severity of the crack and the type of glass are factors that determine if a cracked window glass can be repaired.

Cracks that are less than 1/4 inch long and are not in a stress point can be repaired using a clear glass repair kit. The kit will typically include a two-part epoxy that is applied to the crack and then cured.

However, cracks that are larger than 1/4 inch long or are in a stress point cannot be repaired and the glass must be replaced. This is because the crack will continue to spread and weaken the glass, making it more likely to break.

Also, cracks in structural glass cannot be repaired and the glass must be replaced while tempered glass is more resistant to breakage and can often be repaired with a glass repair kit.

Read Also: 5 Expert Tools You Need for Demolition

What is used to fix window glass?

Window glass can be repaired using a variety of materials, depending on the severity of the damage. For small cracks or chips, a clear resin or epoxy can be used to fill the crack and make it less visible.

For larger cracks or holes, a piece of replacement glass can be cut and fitted into the frame. Some materials you may need in repairing window glass include:

  • Clear resin or epoxy
  • Replacement glass
  • Glazing compound
  • Putty knife
  • Hammer
  • Glazier points

Read Also: How to Measure Square Footage | Learn this now

Who repairs glass windows?


There are a few different types of professionals who can repair glass windows, depending on the severity of the damage.

For instance, glaziers are specialized tradespeople who are trained to install, repair, and replace glass. They have the skills and experience to handle a wide variety of glass repairs, from small cracks to large holes.

On the other hand, window repair technicians are generalists who can repair a variety of window components, including glass, frames, and hardware. They are a good option for repairs that are not too complex.

Also, handymen are skilled tradespeople who can handle a variety of home repairs, including window glass repair. They are a good option for small repairs that you may feel comfortable doing yourself.

Read Also: How to Repair an Oven: Tips and Guidelines

Can you repair the glass by yourself?


Yes, you can repair glass yourself, but it is important to follow safety precautions and use the correct tools and materials to avoid further damage.’

The step-by-step guide above will direct you on how to get started.

How do you fix a cracked window without replacing it?


Repairing a cracked window without replacing it can be an effective and cost-saving solution for minor cracks or chips. However, you must assess the severity of the damage and determine if a repair is feasible before attempting it.

Afterward, follow the guide below to repair the window glass:

  1. Gather materials: Safety goggles, gloves, clear resin or epoxy, putty knife, glass cleaner, and paper towels.
  2. Clean the area
  3. Apply resin or epoxy: Use a toothpick or applicator to apply the resin or epoxy carefully into the crack, filling it completely.
  4. Allow the resin or epoxy to dry: Follow the manufacturer’s instructions for drying time.
  5. Smooth the surface: Once the resin or epoxy is dry, use a putty knife to smooth out the surface, making it flush with the surrounding glass.
  6. Polish the area: Use a fine-grit sandpaper or polishing compound to remove any bumps or imperfections, restoring the clarity of the glass.

How do you stop a crack in a glass window from spreading?

Stopping a crack in a glass window from spreading requires immediate action and proper technique. First, put on safety goggles and gloves to safeguard your eyes and hands from potential glass fragments.

Thoroughly clean the crack and the surrounding area using glass cleaner and paper towels. This removes any dirt or debris that could interfere with the repair.

If the crack is near the edge of the glass, apply masking tape along the edge to prevent the resin or epoxy from spreading beyond the crack. This ensures a neat and controlled repair. Afterward, apply a resin or epoxy and allow it to dry.

Once the resin or epoxy is completely dry, use a putty knife to gently smooth out the surface. Finally, use a fine-grit sandpaper or polishing compound to buff the repaired area.

Can broken glass be used to make new glass?

Yes, broken glass can be recycled and used to make new glass. The process of recycling glass is called glass cullet. Glass cullet is broken glass that is collected and recycled for use in new glass products.

It is typically made up of glass from residential and commercial waste streams. Cullet is an important part of the glass manufacturing process because it can reduce the amount of energy required to produce new glass.

Glass cullet is collected from waste streams and then transported to glass manufacturing facilities. At the facility, the cullet is crushed and washed to remove any impurities. The crushed cullet is then melted in furnaces and combined with new raw materials to form molten glass.

Can you replace just the glass in a single-pane window?

How long does it take to repair window glass?


The time it takes to repair window glass depends on the size and severity of the damage. Small chips or cracks can be repaired in as little as 30 minutes, while larger cracks or holes may take an hour or more.

Replacing an entire window pane can take anywhere from a few hours to a few days. Generally, small chips or cracks take 30 minutes – 1 hour while medium cracks or holes take about 1 – 2 hours.

You may spend 2-4 hours to repair large cracks or holes: 2 – 4 hours and over 8 hours on window pane replacement.

How Much Do Window Glass Repairs Near Me Cost?

Window glass replacement typically costs around $279, with most homeowners spending between $180 and $409.

For standard glass replacement, homeowners can expect to pay anywhere from $200 to $400. In cases of more complex repairs, costs can reach up to $2,000.

Frequently Asked Questions

What type of glazing compound should I use?

For older windows, traditional putty is often used, while newer windows may require silicone sealant or acrylic glazing compound.

How long does window glass repair last?

Small chips or cracks can be repaired in as little as 30 minutes, while larger cracks or holes may take an hour or more.

How can I prevent window breakage?

Install tempered glass, which is more resistant to impact and breakage.
Keep windows away from high-traffic areas and potential hazards.
Regularly inspect windows for cracks or damage.

Can I repair a window with multiple broken panes?

Replacing the entire window is often the safest and most cost-effective solution in such cases.

Conclusion

References

Recommendations

Nneoma is an experienced SEO content writer and the Editor-in-chief at Kiiky.com - your next stop after search. With over 5 years of experience in content writing, Nneoma has mastered the act of providing the right information to users across search engines answering their questions in simple terms. As an editor, she ensures articles are void of grammatical and vocabulary errors enhancing a beautiful reading experience for all. She is an empath who is committed to growth and excellence. Nneoma holds a B.A in English and Literature Studies from a presitigious university in Nigeria, where she served as the Editor-in-Chief of the literary unit. She is a great enthusiast of technological advancement; hence, she holds the Google IT Support Professional Certificate and is currently a student at CISCO Technology Company. Nneoma Gideon volunteers as the editor-in-chief of the biggest tech event in her city - SMFEST. She is a mother who loves writing, travelling, and reading.

— Previous article

10 Ways to Use Baking Soda for Cleaning Your Bathroom

Next article —

Top 10 Spring Plants you don't know about

You May Also Like